ION Audio Premier LP | My tonearm is not returning to the starting position

If your turntable is not returning back to starting position after the record is over or is returning back to starting position prematurely, please run a reset via the steps below!


NOTE: You will only need to provide a small amount of force to move the tonearm across the record! Hardware damage may occur if you prevent the tonearm from resetting back to its starting position after resistance is felt 


1) Raise the tonearm using the lever represented as #5 in the user manual.

2) Manually move the tonearm across the record until you feel the slightest resistance. The tonearm will then “reset” itself back to the starting position 

3) Repeat this process 10 times. 

4) Place a record on the turntable and hit play. 


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article